Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/17178
Title: Auditoría del Sistema de Protecciones de Media Tensión. Caso de estudio Novacero S.A.
Authors: Tituaña Andrade, Alexandra Rocío
Keywords: SISTEMAS ELECTRICOS DE POTENCIA
PROTECCIONES ELECTRICAS
APLICACIONES DE COMPUTADOR
Issue Date: 30-Mar-2017
Publisher: Quito, 2017.
Citation: Tituaña Andrade, A. R. (2017). Auditoría del Sistema de Protecciones de Media Tensión. Caso de estudio Novacero S.A. 137 hojas. Quito : EPN.
Abstract: The project carries out an integral study of protection coordination of the industrial plant NOVACERO, in order to improve the protection system currently settled. For this a modeling of the electrical system of the plant NOVACERO is performed with aid of the simulation program Power Factory DigSilent, therefore a load flow and short-circuit studies are carried out, these simulations are performed in accordance with IEC 60909 standard. The curves time vs current are obtained from each of the branches of the industrial plant Novacero, from where it can be observed that they are selectively coordinated in each of their protection zones respecting the action time interval between them. With the results it is possible to compare the current protection system with the one performed in the project, which shows a difference in the calibration values of the overcurrent relays, nominal fuse ratings and their location in the system, therefore with these results it is possible to suggest changes in NOVACERO plant in order to improve the reliability of the electrical system.
Description: En el proyecto se realiza el estudio de coordinación de protecciones integral de la planta NOVACERO, con el objetivo de mejorar el sistema de protecciones implementado en la actualidad. Para esto se realiza la modelación del sistema eléctrico de la planta NOVACERO en el programa de simulación PowerFactory DigSilent, con esto se procede a realizar el análisis de flujo de carga y el estudio de cortocircuitos, estas simulaciones se las realiza de acuerdo a la norma IEC 60909. Se obtienen las curvas tiempo-corriente de cada una de las ramas de la planta NOVACERO, de las cuales se puede observar que se coordinan de manera selectiva en cada una de sus zonas de protección, respetando el margen de tiempo de actuación entre ellas. Con los resultados se puede comparar el sistema de protecciones actual con el que se realiza en el proyecto, el cual presenta un contraste en cuanto en los valores de calibración de los relés de sobrecorriente, valores nominales de fusibles y su ubicación en el sistema, por lo tanto con estos resultados se puede sugerir los cambios para que la confiabilidad del sistema eléctrico de NOVACERO mejore.
URI: http://bibdigital.epn.edu.ec/handle/15000/17178
Type: bachelorThesis
Appears in Collections:Tesis Ingeniería Eléctrica (IE)

Files in This Item:
File Description SizeFormat 
CD-7697.pdf11,97 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.