Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibdigital.epn.edu.ec/handle/15000/17431
Titel: Síntesis de espumas metálicas de aluminio de celda abierta
Autor(en): Abarca Pérez, Edison Patricio
Stichwörter: MANUFACTURA
SELECCIÓN DE MATERIALES
Erscheinungsdatum: 13-Jun-2017
Herausgeber: Quito, 2017.
Zitierform: Abarca Pérez, E. P. (2017). Síntesis de espumas metálicas de aluminio de celda abierta. 99 hojas. Quito : EPN.
Zusammenfassung: In the present work samples of aluminum foams of open cell were obtained by the method of infiltration of molten metal in soluble preforms, using as preform the sodium chloride (NaCl), with grain size in the range of 0.85- 1.7 mm. These samples were subsequently characterized structurally and mechanically. Regarding the structural characterization, parameters such as relative density, pore size, percentage of porosity and others were studied. All these parameters were analyzed statistically, and indicate that the samples are not totally homogeneous, since, in the majority there is a considerable standard deviation. The average porosity in the samples analyzed was 85.5%, indicating the production of a highly porous foam. The presence of pores with sizes above the established range of NaCl grains (0.85-1.7 mm) indicates that it is inherent in the process. With respect to the mechanical characterization, the compression test performed on a representative sample results in the fact that the extended plateau area of the strain-deformation curve has a slight positive slope, which may be the result of the hardening by constant deformation of the foam. The calculation of the absorbed compressive energy, verifies the high capacity of absorption of energy of deformation, in these materials.
Beschreibung: En el presente trabajo se obtuvieron muestras de espumas de aluminio de celda abierta, mediante el método de infiltración de metal fundido en preformas solubles, utilizando como preforma el cloruro de sodio (NaCl), con tamaño de grano en el intervalo de 0,85-1,7 mm. Posteriormente estas muestras fueron caracterizadas estructural y mecánicamente. Respecto a la caracterización estructural, se estudiaron parámetros tales como densidad relativa, tamaño de poro, porcentaje de porosidad y otros. Todos estos parámetros se analizaron estadísticamente, e indican que las muestras no son totalmente homogéneas, ya que, en la mayoría existe una desviación estándar considerable. La porosidad promedio en las muestras analizadas fue del 85,5%, lo que indica la producción de una espuma altamente porosa. La presencia de poros con tamaños por encima del rango establecido de granos de NaCl (0,85-1,7 mm), indica que es inherente al proceso. Respecto a la caracterización mecánica, el ensayo de compresión realizada a una muestra representativa, da como resultado que el área de meseta extendida de la curva esfuerzo-deformación, presenta una ligera pendiente positiva, lo que puede ser el resultado del endurecimiento por deformación constante que sufre la espuma. El cálculo de la energía compresiva absorbida, verifica la elevada capacidad de absorción de energía de deformación, en estos materiales.
URI: http://bibdigital.epn.edu.ec/handle/15000/17431
Art: masterThesis
Enthalten in den Sammlungen:Tesis Maestría en Diseño, Producción y Automatización Industrial (FIM)

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
CD-7928.pdf11,39 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.