Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibdigital.epn.edu.ec/handle/15000/17485
Titel: Estudio de discontinuidades en bronce fundido mediante radiografía industrial
Autor(en): Jurado Caiza, Daniel Fernando
Stichwörter: FUNDICIÓN
FÍSICA MODERNA
ENSAYOS NO DESTRUCTIVOS
Erscheinungsdatum: 12-Jul-2017
Herausgeber: Quito, 2017.
Zitierform: Jurado Caiza, D. F. (2017). Estudio de discontinuidades en bronce fundido mediante radiografía industrial. 188 hojas. Quito : EPN.
Zusammenfassung: The present project has aim to study discontinuities in cast of melted bronze by means of industrial X-ray radiography. For this, it was necessary to obtain the corresponding exposure diagram for the equipment of the Laboratory of Non Destructive Testing of the Escuela Politécnica Nacional. Initially a schemed plate of aluminum bronze in the form of a stepped wedge was tested by X-rays, with energy values between 110 kV and 160 kV, with a 10 kV increase in each test and for this range of values, exposure time of 60, 90 and 120 seconds were used with each value of radiation energy. The radiographic density of the film was measured on the plates obtained and later the data was analyzed in order to generate the exposure diagram. The specimens for the study of the discontinuities where obtained from aluminum bronze casting according to the specifications stablished in ISO 428 standard. During casting of the melted alloy, the discontinuities where induced. Finally, the specimens where X-ray radiographed and the resulting plates evaluated in order to study discontinuities that were detected, which corresponded mainly to shrinkage and porosity generated by the inadequate exit of gas during solidification.
Beschreibung: El presente proyecto tiene como objetivo estudiar discontinuidades en bronce fundido mediante radiografía industrial, para esto es necesario obtener el diagrama de exposición correspondiente para el equipo del Laboratorio de Ensayos No Destructivos de la Escuela Politécnica Nacional. Inicialmente se maquinó una placa de bronce al aluminio en forma de cuña escalonada la cual se ensayó por rayos X a valores de energía desde los 110 kV hasta 160 kV aumentando 10 kV en cada toma, para este rango de valores se utilizó tres tiempos de exposición de 60, 90 y 120 segundos, con las películas obtenidas se midió la densidad de la película y en base a estos datos se obtuvo el diagrama de exposición. Para obtener las probetas para el estudio de las discontinuidades se realizó la fundición de bronce al aluminio según norma ISO 428, al momento de fundir el metal se indujeron discontinuidades que finalmente se los ensayo por rayos X y se obtuvieron las películas radiográficas que registran las discontinuidades que en su mayoría se trata de rechupes y poros generados por la mala salida de los gases al momento de solidificar.
URI: http://bibdigital.epn.edu.ec/handle/15000/17485
Art: bachelorThesis
Enthalten in den Sammlungen:Tesis Mecánica (IM)

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
CD-7985.pdf7,5 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.