Evaluación de Parámetros de Perforación Adquiridos en Tiempo Real en Pozos J-HD Sec. 12¼” del Campo VMC Perforados del 2013 al 2016

Abstract

The present thesis work is oriented to evaluate drilling parameters acquired in real time in J-HD wells, section 12¼" of the VMC field drilled from 2013 to 2016. It will determine the contribution generated by the monitoring of the parameters of real time drilling, which translates into reducing the occurrence of undesired events, greater profitability for the company and safer operations for employees. For performing this project, it was gathered information of eight wells - type J-HD, in 12¼" section, drilled within VMC field. The present case study contains the generalities of the field, description of the monitoring in real time and general aspects involved in the drilling of J-HD wells - section 12¼". The compulsory information of each type J-HD well, section 12¼” of the VCM field. Also present a technical analysis of drilling parameters acquired in real time during drilling 12¼" section of each J-HD well of the VMC field. It will be presented a learning curve will be analyzed, after this, the drilling parameters of the most efficient well will be compared against the least efficient one, the drilling ROP of all the wells under study will also be analyzed, and the contribution generated by AIM (Asset Integrated Management Center) during the construction of these wells will be analyzed. Finally, conclusions and recommendations that were obtained at the end of study are established.