Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/7966
Title: Diseño y simulación de un horno rotatorio para materiales celulósicos
Authors: Cárdenas Suquillo, Andrés Darío
Keywords: Horno rotatorio
Selección de materiales
Issue Date: 28-Jul-2014
Publisher: Quito, 2014.
Citation: Cárdenas Suquillo, A. D. (2014). Diseño y simulación de un horno rotatorio para materiales celulósicos. Quito: EPN.
Abstract: Este proyecto consiste en diseñar un prototipo que permita una carbonización eficiente de materiales celulósicos. La simulación de temperaturas de trabajo, permite determinar el consumo de combustible necesario para una carga de material predeterminada de 200 kg/h. Para iniciar el diseño se plantea un diámetro interno de 0.7m y una longitud de 5 m. Se requiere de una capa de material refractario, una de aislante y una capa de acero que sostenga las capas previamente mencionadas. El material refractario seleccionado es para trabajo pesado y permite llegar a la temperatura de trabajo, mientras el material aislante permite que la temperatura externa del horno sea segura. El acero seleccionado es una plancha A36 de 10 mm de espesor. Al seleccionar los materiales, se determinó el diámetro interno real de 0.71 m y su longitud de 5.72m. EL peso del horno es de 6.79 toneladas de tal manera que necesita para su accionamiento 54.37 hp y para su operación continua 7.10 hp. El movimiento del horno es generado a través de un engranaje soldado a la superficie, este engrane es del mismo acero que la superficie. El consumo de combustible para la carga predeterminada es de 0.09 kg de combustible/kg de material.- ABSTRACT.- The project consists in a design of a prototype that allows an efficient carbonization of cellulosic materials. The temperature simulation allows to find the combustible consume required for a predetermined load of 200 kg per hour. For start the design, the internal diameter has been set in 0.7 m and the longitude en 5 m. It required a refractory layer, an insulating layer, and a steel layer that cover the previous two layers. The refractory material is for heavy duty, while the temperature is appropriate by the insulating material. The steel layer is of the type A36 with 10 mm of thickness. After the materials selection, the kiln real dimension has been found. The diameter is 0.71 m and 5.72 m long. The kiln´s weight is 6.79 tons, that’s why 54.37 hp is required for starting the movement. The operational power is 7.10 hp. The movement of the kiln is generated by a gear welded to the steel surface. The gear has the same material of the surface. The fuel rate consumed for the predetermined load is 0.09 kg of fuel/ kg of material.
Description: 122 hojas : ilustraciones, 29 x 21 cm + CD-ROM 5667
URI: http://bibdigital.epn.edu.ec/handle/15000/7966
Type: bachelorThesis
Appears in Collections:Tesis Mecánica (IM)

Files in This Item:
File Description SizeFormat 
CD-5667.pdf2,92 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.