Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/10472
Título: Diseño comparativo para edificios en estructuras de acero con diversos tipos de arriostramiento lateral: caso diagonales en cruz
Autor: Venegas Álvarez, Daniel Alejandro
Palabras clave: Estructuras (Construcción)
Construcción de acero
Aplicaciones de computador
Fecha de publicación: 21-abr-2015
Editorial: Quito, 2015.
Resumen: Resumen .- El presente estudio propone la evaluación de diferentes estructuras con características reales y su comportamiento ante fuerzas horizontales que podrían superar al sismo de diseño, su correspondiente desempeño se evaluará utilizando la metodología propuesta por el FEMA 356 y se plantea alcanzar un punto objetivo de seguridad de vida durante un sismo de diseño utilizando una configuración estructural en la que se presenten diagonales rigidizadoras en forma de cruz. En el mismo se evaluará los presupuestos de la parte estructural del edificio la cual comprende: el movimiento de tierras, la cimentación, la superestructura incluyendo sus elementos principales y secundarios, entre estos se considerará las diagonales rigidizadoras en forma de cruz y loseta tipo deck. El sistema estructural que se plantea se espera que nos muestre un comportamiento medianamente dúctil, las diagonales en forma de cruz se diseñaran de tal forma que trabajen exclusivamente a fuerza axial y su comportamiento de falla sea formar rótulas plásticas (dúctiles), esto implica que tanto los elementos rigidizadores como sus conexiones a columnas y vigas no fallen de manera frágil y permitan una deformación controlada. El objetivo de desempeño esperado se plantea considerando las características físicas y de funcionamiento de las edificaciones.El software ETABS 2013 es la herramienta que nos permitirá realizar los chequeos necesarios en los cuales se cumplan los requerimientos mínimos durante un Análisis Estático Lineal cumpliendo con la filosofía de diseño, los objetivos de diseño planteados se evaluarán mediante el Análisis No Lineal Estático PUSHOVER y comparando la curva de capacidad obtenida con la demanda esperada. Finalmente se evaluarán los precios unitarios y se creará un presupuesto referencial. Abstract .- The present study evaluates different structures set in real conditions and their behavior under horizontal forces that might occur during a seism. Each performance will be evaluated using the FEMA 356 methodology. The primary objective is to reach a objective life security point during a designed seism, using a diagonal x-braced concentrically frames configuration. This study will also evaluate the effect of the utilization of the structure in the cost of the structure of the building, which includes: earth moving, foundation and the superstructure, including main and secondary elements. The Diagonal x-braced concentrically frames and the deck-type tile cost will be considered as well. This research will try to prove that utilizing the structural SCBF configuration; moderate ductility can be obtained. X-braced frames in will be designed in such way that only the axial force will be at use, and at failure, the formation of hinges is expected. This implies that the stiffener elements and their connections to the columns and beams will not fragilely fail, allowing a controlled deformation instead. The performance point expected to be reached its evaluated through their physical and operation characteristics. The results prove that the present method surpasses such performance point, ensuring a energy dissipation behavior. ETABS 2013 software it’s a tool that will allow to perform the required checks that comply the minimum requirements in Static Linear Analysis, fulfilling the design philosophy. The posed designed objectives will be evaluated using the Static Non-Lineal Pushover Analysis, comparing the capacity-curve with the expected demand. Finally the unitary prices will be evaluated and a reference budget will be created.
Descripción: 173 hojas : ilustraciones, 29 x 21 cm + CD-ROM 6197
URI: http://bibdigital.epn.edu.ec/handle/15000/10472
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Ingenieria Civil y Ambiental (ICA)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD-6197.pdf12,65 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.