Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/17042
Title: Diseño y simulación de la cápsula tecnológica para el proyecto Quito Cables
Authors: Costales Espinosa, Jaime Jonathan
Toapanta Arias, Rodrigo Alexander
Keywords: ESTRUCTURAS METÁLICAS
MECÁNICA DE MATERIALES
Issue Date: 8-Feb-2017
Publisher: Quito, 2017.
Citation: Costales Espinosa, J. J., & Toapanta Arias, R. A. (2017). Diseño y simulación de la cápsula tecnológica para el proyecto Quito Cables. 204 hojas. Quito : EPN.
Abstract: The exponential growth of the population of Quito towards the upper districts generates the need for an adequate mobility solution for the passengers who move daily from the mentioned sectors. The appropriate system to provide this solution is a cable transportation system named by the municipality as Quito Cables. A component of the cable transportation system is the technological capsule whose structure must house the electromechanical equipment and must withstand the loads generated by them and the other conditions to which a structure is commonly subjected. The purpose of this study is to design the structure based on current regulations. Geometry was defined based on the requirements of the electromechanical equipment. The loads were determined using the parameters stipulated in the NEC 2015. By analyzing the load combinations detailed in SAP2000 we were able to dimension the structural elements of the technological capsule. A manual calculation was performed to compare the results obtained with the software results and it was determined that they are valid and that the structure will present an optimum performance. To finalize the study a project budget was made and the pertinent structural plans were generated.
Description: El crecimiento exponencial de la población de Quito hacia los barrios altos genera la necesidad de una solución de movilidad adecuada para los pasajeros que se desplazan diariamente desde los sectores mencionados. El sistema adecuado para brindar esta solución es un sistema de transporte por cable bautizado por el municipio como Quito Cables. Un componente del sistema de trasporte por cable es la cápsula tecnológica cuya estructura debe alojar el equipo electromecánico y debe soportar las cargas generadas por los mismos y por las demás condiciones a las que se ve sometida comúnmente una estructura. El presente estudio tiene como finalidad realizar el diseño de la estructura en base a normativa vigente. Se definió la geometría en base a los requerimientos del equipo electromecánico. Se determinaron las cargas mediante los parámetros estipulados en la NEC 2015. Analizando las combinaciones de carga detalladas en SAP2000 se logró dimensionar los elementos estructurales de la cápsula tecnológica. Se realizó un cálculo manual para comparar los resultados obtenidos con los resultados del software y se determinó que son válidos y que la estructura presentará un desempeño óptimo. Para finalizar el estudio se realizó un presupuesto del proyecto y se generaron los planos estructurales pertinentes.
URI: http://bibdigital.epn.edu.ec/handle/15000/17042
Type: bachelorThesis
Appears in Collections:Tesis Mecánica (IM)

Files in This Item:
File Description SizeFormat 
CD-7624.pdf17,15 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.