Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibdigital.epn.edu.ec/handle/15000/17878
Titel: Análisis del comportamiento frente a la corrosión del Acero Austenítico 304 2B sumergido en un medio salino con baja concentración de Azufre y sometido a cargas monotónicas (flexión).
Autor(en): Jácome Soria, Diego Fernando
Vicente Romero, Carlos Julio
Stichwörter: ASTM G 39-16
ACEROS
Erscheinungsdatum: 15-Aug-2017
Herausgeber: Quito, 2017.
Zitierform: Jácome Soria, D. F., & Vicente Romero, C. J. (2017). Análisis del comportamiento frente a la corrosión del Acero Austenítico 304 2B sumergido en un medio salino con baja concentración de Azufre y sometido a cargas monotónicas (flexión). 110 hojas. Quito : EPN.
Zusammenfassung: The selection of Stainless Steels for the construction of useful structures in buildings, due to the aesthetics, mechanical properties, and high corrosion resistance presented by this material, especially in the coastal region, where the percentage of salinity is considerable, deserve the study of Austenitic Stainless Steel 304-2B through the test of standardized specimens, which are submerged in a salt environment with low sulfur concentration and under certain parameters established in the ASTM G 39-16 standard. The presence of the sulfur in the solution allows characterizing the behavior that this type of Stainless Steel could face in a possible emission of ash from the volcanoes existing in the Highland region. The experimental technical study compiled data about the corrosion rate, depth of corrosion and types of corrosion that they are generated in the specimens subjected to specific loading stresses, in order to evaluate the changes in the microstructure of the material, hardness and mechanical behavior at the end of the study. The tests of hardness, chemical composition, macrographs, metallography and electron microscopy were used to determine the behavior of this type of steel under the established conditions. In spite of the high corrosion resistance of stainless steels of this type, it was observed the presence of corrosion by pitting and intergranular corrosion at one end of the specimen subjected to a lower load. The central zone of the specimens, which was exposed to the loading stresses, did not present any type of corrosion.
Beschreibung: La selección de aceros inoxidables para la conformación de estructuras útiles en edificaciones debido a la estética, propiedades mecánicas y alta resistencia a la corrosión que presenta este material especialmente en la región costera, en donde el porcentaje de salinidad es considerable, ameritan el estudio del acero inoxidable austenítico 304-2B, mediante el ensayo de probetas estandarizadas y sumergidas en un medio salino con baja concentración de azufre y bajo ciertos parámetros establecidos en la norma ASTM G 39-16. La presencia del azufre en la solución permite caracterizar el comportamiento que pudiera tener este tipo de acero frente a imprevistos naturales como la posible emisión de ceniza de los volcanes existentes en la región interandina. El estudio técnico experimental recopiló datos referentes a la velocidad de corrosión, profundidad de la corrosión y los tipos de corrosión que se generan en las probetas sometidas a determinados esfuerzos de carga; lo cual permitió evaluar los cambios en la microestructura del material, dureza y comportamiento mecánico al final del estudio. Los ensayos de dureza, composición química, macrografías, metalografías y microscopia electrónica sirvieron para determinar el comportamiento de este tipo de acero bajo las condiciones establecidas. A pesar de la alta resistencia a la corrosión que presentan los aceros inoxidables de este tipo, se observó la presencia de corrosión por picadura y corrosión intergranular en uno de los extremos de la probeta sometida a menor carga. La zona central de las probetas, en donde se encontraba distribuida precisamente la carga, no presentó ningún tipo de corrosión.
URI: http://bibdigital.epn.edu.ec/handle/15000/17878
Art: bachelorThesis
Enthalten in den Sammlungen:Tesis Mecánica (IM)

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
CD-8100.pdf21,98 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.