Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/20025
Título: Implementación de un sistema de video-vigilancia para la casona principal de la ESFOT
Autor: Palacios Villagrán, Jonathan Miguel
Yacelga Farinango, Daniel Andrés
Palabras clave: CABLEADO ESTRUCTURADO
REDES DE INFORMACIÓN
Fecha de publicación: 8-feb-2019
Editorial: Quito, 2019.
Citación: Palacios Villagrán, J. M., & Yacelga Farinango, D. A. (2019). Implementación de un sistema de video-vigilancia para la casona principal de la ESFOT. 133 hojas. Quito : EPN.
Resumen: The project consists of the implementation of a video-surveillance system for the main house of the ESFOT, which will allow to supervise some areas and places from a fixed and mobile place in certain hours of the day and night, allowing to observe any event that may arise in a certain time. In order to know firsthand the current situation of the building and its needs in terms of safety, an inspection of the facilities was carried out, this allowed to determine the necessary devices and materials for the implementation. With the help of the Auto CAD program, the points where the cameras, routes and route of the connection and power cables will be located are set out. The following describes the installation of the cameras, ducts, gutters and equipment of the video surveillance system in the respective sites where the diagnosis was made taking into account norms and standards of structured cabling. Finally, the operation tests of the video surveillance system are carried out.
Descripción: El proyecto consiste en la implementación de un sistema de video-vigilancia para la casona principal de la ESFOT, el cual permitirá supervisar algunas zonas y lugares desde un lugar fijo y móvil en determinadas horas del día y la noche, permitiendo así observar cualquier evento que pueda suscitarse en un tiempo determinado. Para conocer de primera mano cuál es la situación actual del edificio y sus necesidades en cuanto se refiere a seguridad, se realizó una inspección de las instalaciones, esto permitió determinar los dispositivos y materiales necesarios para la implementación. Con la ayuda del programa Auto CAD se establecen los puntos donde estarán ubicadas las cámaras, rutas y recorrido de los cables de conexión y alimentación, a continuación se describe la instalación de las cámaras, ductería, canaletas y equipos del sistema de video-vigilancia en los sitios respectivos donde se realizó el diagnóstico tomando en cuenta normas y estándares de cableado estructurado. Finalmente se efectúa las pruebas de funcionamiento del sistema de video-vigilancia.
URI: http://bibdigital.epn.edu.ec/handle/15000/20025
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Electrónica y Telecomunicaciones (ET)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD-9367.pdf1,79 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.