Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibdigital.epn.edu.ec/handle/15000/20492
Titel: Evaluación de la remoción de methomyl en soluciones acuosas sintéticas utilizando arcilla bentonita natural y modificada
Autor(en): León Ortega, Henrry Eddy
Stichwörter: AGUAS RESIDUALES
CONTAMINACIÓN
INGENIERÍA AMBIENTAL
Erscheinungsdatum: 16-Aug-2019
Herausgeber: Quito, 2019.
Zitierform: León Ortega, H. E. (2019). Evaluación de la remoción de methomyl en soluciones acuosas sintéticas utilizando arcilla bentonita natural y modificada. 129 hojas. Quito : EPN.
Zusammenfassung: The removal of methomyl was evaluated, using as an adsorbent clay bentonite from the Ecuadorian coastl region. The clay was purified and modified by: thermal activation (A-AT) at 200 ° C for two hours; acid activation (A-AA) with 3N sulfuric acid, for one hour at room temperature; and, saline activation (A-AS) with 1.5 of the CIC of the clay with hexadecyltrimethyl ammonium bromide for 12 hours. The removal was carried out with the different samples of clays in three ranges of particles and three operating temperatures (20, 30 and 40 ° C) by placing 0.5 g of clay with 50 mL of synthetic methomyl wastewater. Clays were characterized by DR-X, FTIR and BET. Pesticide removal was quantified using UPLC-MS / MS and the results obtained were analyzed (ANOVA) for a completely randomized design in divided plot and 2 repetitions with general and mixed linear models. The interaction temperature × diameter × clay had a significant effect on the percentage of pesticide removal. The highest removal efficiency obtained was 76% with A-AT (d1 = 106-150 µm) at a temperature of 40 ° C, followed by 67% with A-AT (d3 = less than 75 µm) at temperatures of 30 and 40 ° C.
Beschreibung: Se evaluó la remoción de methomyl, usando como adsorbente arcilla bentonita del litoral ecuatoriano. La arcilla fue purificada y modificada por: activación térmica (A-AT) a 200°C por dos horas; activación ácida (A-AA) con ácido sulfúrico 3N, durante una hora a temperatura ambiente; y, activación salina (A-AS) con 1,5 de la CIC de la arcilla con bromuro de hexadeciltrimetil amonio durante 12 horas. La remoción se realizó con las diferentes muestras de arcillas en tres rangos de partículas y tres temperaturas de operación (20, 30 y 40°C) colocando 0,5 g de arcilla con 50 mL de agua residual sintética de methomyl. Las arcillas se caracterizaron mediante DR-X, FTIR y BET. La remoción del plaguicida se cuantificó usando UPLC-MS/MS y los resultados obtenidos fueron analizados (ANOVA) para un diseño completamente al azar en parcela dividida y 2 repeticiones con modelos lineales generales y mixtos. La interacción temperatura × diámetro × arcilla presentó un efecto significativo sobre el porcentaje de remoción del plaguicida. La mayor eficiencia de remoción obtenida fue del 76 % con A-AT (d1=106-150 µm) a una temperatura de 40°C, seguida por un 67 % con la A-AT (d3= menor a 75 µm) a las temperaturas de 30 y 40 °C.
URI: http://bibdigital.epn.edu.ec/handle/15000/20492
Art: masterThesis
Enthalten in den Sammlungen:Tesis Maestría en Ingeniería Ambiental (FICA)

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
CD 9979.pdf5,49 MBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.