Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/20520
Title: Diseño e implementación de dos módulos educacionales, basados en dispositivos de maniobra y relé programable (Logo)
Authors: Parra Oña, Carlos Fernando
Moreno Moreno, Alex Eduardo
Keywords: ELECTROMECÁNICA
MÓDULO DIDÁCTICO
PULSADOR DE EMERGENCIA
Issue Date: 1-Aug-2019
Publisher: Quito, 2019.
Citation: Parra Oña, C. F. & Moreno Moreno, A. E. (2019). Diseño e implementación de dos módulos educacionales, basados en dispositivos de maniobra y relé programable (Logo). 122 hojas. Quito : EPN.
Abstract: The design and implementation of two educational modules for the laboratory of the subject of “Industrial Control I” in the School of Technologists of the National Polytechnic School was carried out, this process includes: the design and construction of a support structure, sizing and installation of electromechanical control equipment and finally the assembly of modules already assembled within the area planned and assigned by the faculty. Each educational module consists of the following electromechanical elements: a V8 Logo, six contactors, a thermal relay, four pilot lights, two push buttons, an emergency push button and two protection thermometers; All these elements are from a single brand that is well known in the market, which is “Siemens”. All electromechanical elements are mounted on their respective plates, the same that are superimposed on the rail of the support structure, these can be mobilized from one module to another; according to the needs of the operator. The finally assembled structure forms an automatic control system which will allow the simulation of industrial processes.
Description: Se realizó el diseño y la implementación de dos módulos educacionales para el laboratorio de la asignatura de “Control Industrial I” en la Escuela de Formación de Tecnólogos de la Escuela Politécnica Nacional, dicho proceso incluye: el diseño y la construcción de una estructura soporte, dimensionamiento e instalación de los equipos electromecánicos de control y finalmente el montaje de los módulos ya ensamblados dentro del área prevista y asignada por la facultad. Cada módulo educacional consta de los siguientes elementos electromecánicos: un Logo V8, seis contactores, un relé térmico, cuatro luces piloto, dos pulsadores, un pulsador de emergencia y dos magnetotermicos de protección; todos estos elementos son de una sola marca muy reconocida en el mercado la cual es “Siemens”. Todos los elementos electromecánicos van montados en sus respectivas placas, las mismas que van superpuestas sobre el riel de la estructura soporte, estas pueden ser movilizadas de un módulo hacia otro; según las necesidades del operador. La estructura finalmente ensamblada, conforma un sistema de control automático la cual permitirá simular procesos industriales. Finalmente se realizaron pruebas de funcionamiento, tanto eléctricas como mecánicas de todas partes componentes de cada módulo en cuestión, con el fin de comprobar su funcionamiento y descartar posibles fallas.
URI: http://bibdigital.epn.edu.ec/handle/15000/20520
Type: bachelorThesis
Appears in Collections:Tesis Electromecánica (EM)

Files in This Item:
File Description SizeFormat 
CD 10011.pdf7,33 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.