Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/20601
Título: Diseño e implementación de un inversor multinivel trifásico topología diode-clamped de baja potencia con modulación pd-pwm
Autor: Sánchez Freire, Daniel Alejandro
Palabras clave: ELECTRÓNICA DE POTENCIA
MÁQUINAS
CONTROL
Fecha de publicación: 12-dic-2019
Editorial: Quito, 2019.
Citación: Sánchez Freire, D. A. (2019). Diseño e implementación de un inversor multinivel trifásico topología diode-clamped de baja potencia con modulación pd-pwm. 153 hojas. Quito : EPN.
Resumen: In this work, the simulation, design and implementation of a three-phase inverter multilevel diode-clamped topology with PD-PWM modulation is proposed. The purpose of this work is to put control action values by means of an user interface and thus to obtain their corresponding real value at the output of a three-phase multi-level inverter. For the simulation the Matlab / Simulink software will be used, and for the user interface, the Labview Software will be used , which will allow to send the control actions by serial communication to a microprocessed system, this will perform the PD-PWM modulation taking into accounts the voltage value of the DC bus connected to the system, generating thus the trigger signals for the power electronics devices, which are connected in the multi-level three-phase inverter board. The system will tests with R, RL loads and with a three-phase induction motor.
Descripción: En este trabajo de titulación se plantea el diseño, simulación e implementación de un inversor trifásico multinivel topología diode-clamped con modulación PD-PWM. El propósito del trabajo de titulación es poder ingresar mediante una interfaz de usuario, valores de acciones de control y poder obtener su correspondiente valor real en voltaje a la salida de las fases del inversor trifásico multinivel. Para la simulación se utilizará el software Matlab/Simulink, y para el interfaz de usuario se utilizará el Software Labview, el cual permitirá a su vez enviar las acciones de control por comunicación serial al sistema microprocesado, éste realizará la modulación PD-PWM tomando en cuenta el valor del voltaje del bus DC conectado al sistema, generando así las señales de disparo de los semiconductores de potencia que están conectadas en la placa del inversor trifásico multinivel. Las pruebas del sistema serán realizadas con cargas R, R-L y un motor trifásico de inducción.
URI: http://bibdigital.epn.edu.ec/handle/15000/20601
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Electrónica y Control (IEC)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD 10093.pdf8,78 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.