Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/20690
Título: Implementación de un sistema de acceso y seguridad para el Laboratorio de Tecnología Industrial
Autor: Guano Quimbita, Francisco Delfín
Sandoval Amagua, Wendy Estefanía
Palabras clave: INDUSTRIA
CONTROL
SENSOR
Fecha de publicación: 16-dic-2019
Editorial: Quito, 2019.
Citación: Guano Quimbita, F. D. & Sandoval Amagua, W. E. (2019). Implementación de un sistema de acceso y seguridad para el Laboratorio de Tecnología Industrial. 107 hojas. Quito : EPN.
Resumen: The present project was implemented to meet the needs established by the users of the Industrial Technology Laboratory as that of an access control for authorized persons, lighting, continuous surveillance and security as well as a fire system. The electrical characteristics of the selected devices were established, such as the voltage and working current, as well as the characteristics of the Programmable Logic Controller (PLC) used and the configuration of its inputs and outputs, with the design conditions of the respective control algorithm as detailed in the Project Introduction. The methodology describes the procedure used for the implementation of the project and the different devices that make up each system with its equivalent diagram. The results and discussions detail the criteria for the location of each sensor and device that meets the conditions set out in the control algorithm and the operation of each system, in addition to the tests to which they were subjected in order to make their operation optimal considering the response time to claims and the voltage signal of the different devices operating at 12 (VDC) with a maximum tolerance of 4.16% in the voltage drop. Finally, the conclusions and recommendations obtained through the implementation and the respective operational tests of each system are observed.
Descripción: El presente proyecto fue implementado para satisfacer las necesidades establecidos por los usuarios del Laboratorio de Tecnología Industrial como la de un control de acceso para personas autorizadas, iluminación, vigilancia continua y seguridad además de un sistema contra incendios. Se estableció las características eléctricas de los dispositivos seleccionados como la tensión y corriente de trabajo, al igual que las características del Controlador Lógico Programable (PLC) utilizado y la configuración de sus entradas y salidas, con las condiciones de diseñó del respectivo algoritmo de control cómo se detalla en la Introducción del Proyecto. En la metodología se describe el procedimiento utilizado para la implementación del proyecto y los diferentes dispositivos que componen cada sistema con su diagrama equivalente. En los resultados y discusiones se encuentra detallo los criterios para la ubicación de cada sensor y dispositivo que cumpla con las condiciones establecidas en el algoritmo de control y el funcionamiento de cada sistema, además de las pruebas a las cuales se sometieron para que su funcionamiento sea óptimo teniendo en consideración el tiempo de respuesta ante siniestros y la señal de voltaje de los diferentes dispositivos que funcionan a 12 (VDC) con una tolerancia máxima de 4.16% en la caída de tensión. Por último, se observa las conclusiones y recomendaciones obtenidas mediante la implementación y las respectivas pruebas de funcionamiento de cada sistema.
URI: http://bibdigital.epn.edu.ec/handle/15000/20690
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Electromecánica (EM)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD 10195.pdf3,31 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.