Implementación de tableros de control para monitoreo y seguridad de las aulas de la ESFOT (tableros 1 y 2)

Abstract

This article explains the design and implementation of a system that allows real-time monitoring of the status of windows, doors and lights of classrooms 34, 35, 36, 37, 38 and 39 of the Technologist Training School (ESFOT), the states are controlled and monitored by a board that has a micro controller (Arduino) that commands a semi-automatic electromechanical system. The project consists of four chapters.

Chapter 1 contains a brief introduction and the approach to the problem, based on the need for an access control and monitoring system for ESFOT classrooms.

Chapter 2 describes the methodology used for the development of the project and exposes the activities necessary for the fulfillment of the objectives, using techniques and instruments for its execution.

Chapter 3 indicates the design and implementation of the electrical supply, the construction of the control boards established in the existing designs, the wiring of AC and DC connections and finally the functional tests and their results.

The fourth chapter shows the conclusions and recommendations obtained from the execution and operation of the project.