Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/21262
Título: Simulación del impacto del compresor de 5 (hp) en la red eléctrica de LTI-ESFOT
Autor: Bustamante Celi, Cristhian Rafael
Palabras clave: IMPACTO ELÉCTRICO
RED ELÉCTRICA
VOLTAJE
Fecha de publicación: 27-nov-2020
Editorial: Quito, 2020.
Citación: Bustamante Celi, C. R. (2020). Simulación del impacto del compresor de 5 (hp) en la red eléctrica de LTI-ESFOT. 87 hojas. Quito : EPN.
Resumen: Based on the need to implement a new compressor in the Industrial Technology Laboratory, this simulation and investigation will help to evaluate the current LTI protection system for the future implementation of a compressor. This will ensure good operation when using a compressor with a power like 5 (HP). A study was carried out in which it is intended to demonstrate the impact that a compressor of these characteristics will have on the electrical network. The simulations were carried out with possible two-phase and three-phase compressors with different types of starting to determine the one that causes the least impact and with the lowest losses. The simulations were carried out based on the 4 possible connections most used in the Industrial Technology Laboratory. The effective voltages and currents were considered. The electromagnetic effects in the network will be analyzed with the Matlab program, with the real data from the LTI laboratory; This will allow to observe the effects of the connection of the compressor with the rest of the equipment.
Descripción: En base a la necesidad de implementar un nuevo compresor en el Laboratorio de Tecnología Industrial, la presente simulación e investigación ayuda a evaluar el sistema actual de protecciones del LTI, para la implementación a futuro de un compresor de mayor potencia. Esto permitirá garantizar un buen funcionamiento al momento de usar un compresor con potencia similar a 5 (HP). Se realizó un estudio en el cual se pretende demostrar el impacto que tendrá en la red eléctrica un compresor de dicha potencia. Las simulaciones se realizaron con posibles compresores bifásicos y trifásicos con diferentes tipos de arranque, esto con el fin de identificar el compresor que cause un menor impacto y con menores pérdidas. Las simulaciones se llevaron a cabo en base a las 4 posibles cargas más usadas en el Laboratorio de Tecnología Industrial. Se tomaron en cuenta los voltajes y las corrientes eficaces. Se analizaron los efectos electromagnéticos en la red con el programa MATLAB, usando los datos reales del laboratorio del LTI; lo que permite observar los efectos de la conexión del compresor con el resto de los equipos.
URI: http://bibdigital.epn.edu.ec/handle/15000/21262
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Electromecánica (EM)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD 10779.pdf3,76 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.