Implementación de un sistema de iluminación automática para el área de instalaciones eléctricas del laboratorio LTI-IE-ESFOT

Abstract

The operation of a lighting system is shown at a certain time thanks to the contactor connected to the output of the LOGO Siemens controller, the same one that commands two independent circuits with one output for each circuit, activating and disabling the same system, in addition, has a manual drive. Lighting levels provide a certain amount of illumination from 500 to 1000 Luxes for practice compliance with uniform illumination in accordance with the NEC_SB_IE. The purpose of the project is to support in the process of training students and teachers of the electromechanical, electronics and telecommunications careers.

Chapter One contains the introduction of the draft degree, the objectives, and goals to be achieved.

Chapter Two describes the methodology used for project execution and an analysis of available lighting. It shows the development during the project, the creation of the program and the calculations of the elements used.

Chapter Three describes the results and discussions obtained, as well as the performance tests carried out.

Chapter Four shows the conclusions and recommendations made from the implementation and operation of the automatic lighting system carried out in the LTI-IE-ESFOT laboratory.