Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/21686
Title: Desarrollo de una aplicación para analizar el impacto de la longitud del prefijo cíclico en sistemas OFDM.
Authors: Cajamarca Chicaiza, José Federico
Keywords: SOFTWARE DE SIMULACIÓN
MATLAB
Issue Date: 6-May-2021
Publisher: Quito, 2021
Citation: Cajamarca Chicaiza, J. F. (2021). Desarrollo de una aplicación para analizar el impacto de la longitud del prefijo cíclico en sistemas OFDM. 87 hojas. Quito : EPN.
Abstract: The objective of this titration project is to develop an application in MATLAB to analyze the impact of cyclic prefix length in OFDM (Orthogonal Frequency Division Multiplexing) systems. The application will display the results in terms of BER (Bit Error Rate) vs SNR (Signal to Noise Ratio) and BER vs delay. In chapter one the theoretical framework of the project is described, OFDM systems are analyzed, specifically the cyclic prefix, later a brief study of the wireless channel and channel models is carried out: AWGN, Rayleigh and Rician. Chapter two details how the application is implemented in MATLAB, specifically in App Designer. For this, the constitutive blocks of the application are analyzed, for example, the panel for the general configuration of the parameters by the user, and the presentation of the results according to the terms indicated above. The results obtained from the application performance tests and the validation of the results presented by the application. Finally, in chapter four the conclusions reached at the end of the project are presented.
Description: El objetivo de este proyecto de titulación es desarrollar una aplicación en MATLAB para analizar el impacto de la longitud de prefijo cíclico en sistemas OFDM (Orthogonal Frequency Division Multiplexing). La aplicación mostrará los resultados en términos de BER (Bit Error Rate) vs SNR (Signal to Noise Ratio) y BER vs retardo. En el capítulo uno se describe el marco teórico del proyecto, se analiza los sistemas OFDM, específicamente el prefijo cíclico, posteriormente se realiza un breve estudio del canal inalámbrico y de los modelos de canales: AWGN, Rayleigh y Rician. En el capítulo dos se detalla cómo se implementa la aplicación en MATLAB, específicamente en App Designer. Para ello se analizan los bloques constitutivos de la aplicación, por ejemplo, el panel para la configuración general de los parámetros por parte del usuario, y la presentación de los resultados según los términos indicados anteriormente. Los los resultados obtenidos de las pruebas de funcionamiento de la aplicación y la validación de los resultados presentados por la aplicación. Finalmente, en el capítulo cuatro se exponen las conclusiones a las que se llegó al finalizar el proyecto.
URI: http://bibdigital.epn.edu.ec/handle/15000/21686
Type: bachelorThesis
Appears in Collections:Tesis Electrónica y Redes de Información (IER)

Files in This Item:
File Description SizeFormat 
CD 11166 (1).pdf3,61 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.