Implementación de un contador y clasificador de monedas automático.

Abstract

First, the requirements and needs of the project were identified, then a deep investigation was carried out on each topic and area in terms of hardware and software required. Once the investigation is done the information obtained was collected to make the selection of the appropriate hardware, software and electronic components for the project implementation. Based on the requirements found, the hardware design was created and the appropriate electronic components were chosen for each area of the project. On the other hand, the microprocessor system was chosen, which allowed the creation of the project´ source code. At the next point, the complete prototype design was carried out and therefore the software and hardware of the project was implemented, then the functional tests were done in order to identify and fix any possible shortcoming or error. Finally, the errors found were solved as a result the correct and adequate operation of the project was guaranteed.