Construcción de seis módulos didácticos de transformadores para aplicaciones monofásicas.

Abstract

This project proposes the construction and implementation of six didactic modules of transformers for single-phase applications which will be located in the Electrical Machines Laboratory in classroom 35 of the ESFOT, this in order that the students of Superior Technology in Electromechanics become better acquainted with these types of electrical machines. This document consists of four sections that are mentioned below: 1) Introduction: the subject of the project is briefly explained, where it will be located, for whom it is focused and its importance; Likewise, there are the objectives achieved in this project. 2) Methodology: in this section it is explained how the parameters required for the modules were obtained, as well as the design criteria necessary for the manufacture of the transformers. 3) Results and Discussion: according to the most important parameters obtained, the calculations developed, components that were used, the module construction procedure, results of the tests developed to verify the correct functioning of the modules are presented. 4) Conclusions and recommendations: in this section the importance of the design criteria for the implementation of each transformer is presented, an analysis of the results obtained according to the tests carried out is also presented and certain suggestions are also given to serve as support. to other students who are going to do a similar project.