Implementación de un sistema de iluminación automático para el laboratorio de tecnología industrial : control automático de iluminación.

Abstract

This project deals with the implementation of an automatic control system for LED lighting fixtures for the Industrial Technology Laboratory, located in the School of Technologist Training in the city of Quito-Ecuador. The laboratory has two work areas, where each of these will have a circuit called waiting which will serve for the traffic of people inside the place and will give a lighting level greater than 150 [lx], also will have a second circuit called work, which will be activated when laboratory practices are carried out, which will give a lighting level greater than 500 [lx], specified by the NEC standard. Chapter one covers the introduction about the control system, the extent of the project, as well as the objectives that define the goals to be achieved in this project. Finally, the theoretical framework related to this work is detailed. Chapter two contains the methodology used to achieve the proposed objectives. An analysis of the electrical status of the laboratory is made and knowing the minimum requirements necessary, we proceed with the design and implementation of the lighting control system. Chapter three shows the results of the control system performance tests, the illumination levels obtained in each square meter of the LTI-ESFOT, as well as a brief cost analysis of the project implementation. Chapter four covers the conclusions and chapter 5 the recommendations based on the development, implementation and operation of the lighting control system. The component "CONTROL AUTOMÁTICO DE ILUMINACIÓN" complements the component "INSTALACIÓN ELÉCTRICA DE LOS CIRCUITOS DE ILUMINACIÓN", developed by Mr. Carlos Vicente Paillacho Chicaiza.