Implementación de un sistema de riego por aspersión automático usando un microcontrolador arduino y sensores de humedad de suelo para el programa "territorios que sanan" : implementación de la parte electrónica del sistema.

Abstract

The United Nations Development Program (PNUD) together with the "TERRITORIOS QUE SANAN" Program aims to implement an irrigation system that arises from the scarcity of water and the reduction of physical effort made by people when carrying out a traditional irrigation. Therefore, to solve these problems, an automated irrigation system is implemented in the Tumbaco sector that works with three modes of operation: Manual, Automatic and Timed, for this the Arduino platform was used. To carry out the project, seven parts were developed, which are detailed below: In part one, intended for the explanation of the developed component, the objectives, scope and theoretical support requested to correctly develop this project are detailed. In part two it is related to the methodology used for the implementation of the electronic system. This part is executed according to the order in which the specific objectives are described. In part three, everything related to the results achieved in the three modes of operation of the electronic system is established. In part four the conclusions originated from all the development of the programming part of both the inputs and outputs of the microcontroller are covered. Part five contains the recommendations, these arise based on the analysis of results, where the successes and failures obtained in the development of the project are verified. In part six, the bibliographic references that were used to support the development of the electronic system of the project are established. Finally, part seven corresponds to the annexes that complement the information necessary to validate the project development process.