Please use this identifier to cite or link to this item: http://bibdigital.epn.edu.ec/handle/15000/17492
Title: Análisis de posibles alternativas de tratamiento para muestras de aguas de dewatering y fluidos de perforación
Authors: Morillo Rosero, Humberto Santiago
Keywords: AGUAS DE PRODUCCIÓN
CONTAMINACIÓN
LEGISLACIÓN AMBIENTAL
Issue Date: 17-Jul-2017
Publisher: Quito, 2017.
Citation: Morillo Rosero, H. S. (2017). Análisis de posibles alternativas de tratamiento para muestras de aguas de dewatering y fluidos de perforación. 80 hojas. Quito : EPN.
Abstract: In this research project, physical-chemical analysis was performed on the wastewater from the QMAX laboratory where it was observed that the DBO and DQO are outside the permissible limits established by the current environmental regulations. After making several treatment options, the option is proposed to incorporate a bioreactor in the QMAX laboratory for the treatment of wastewater, which is constituted by a transparent acrylic amphora to which air is supplied through a compressor, through of a copper diffuser in the bottom. This help a complete mixture at the moment of adding the flocculant and coagulant necessary for the water discharged to have a quality so that, although it does not reach the point of being potable, does not contain too many contaminants in a way that is not a danger to the pollution of the environment, and in this way do not affect in an excessive way flora and fauna besides the health of the people. In addition, take advantage of the QMAX laboratory resources to reduce the cost of wastewater disposal.
Description: En este proyecto de investigación se realizó análisis físico-químicos a las aguas residuales del laboratorio QMAX donde se observó que el DBO y DQO se encuentran fuera de los límites permisibles establecidos por la reglamentación ambiental vigente. Luego de realizar varias opciones de tratamiento, se plantea la opción de incorporar en el laboratorio QMAX un bioreactor para el tratamiento de las aguas residuales, el cual está constituido por un ánfora de acrílico transparente a la cual se suministrara aire mediante un compresor, a través de un difusor de cobre que se encuentra en el fondo. Esto ayuda a una mezcla completa en el momento de adicionar el floculante y coagulante necesario para que el agua descargada tenga una calidad de modo que, aunque no llegue al punto de ser potable, no contenga demasiados contaminantes de forma que no sea un peligro para la contaminación del medio ambiente, y de esta manera no afectar de manera excesiva flora y fauna además de la salud de las personas. Adicionalmente, aprovechar de esta manera los recursos del laboratorio QMAX para reducir el costo de eliminación de aguas residuales.
URI: http://bibdigital.epn.edu.ec/handle/15000/17492
Type: bachelorThesis
Appears in Collections:Tesis Ingeniería en Petróleos (IPET)

Files in This Item:
File Description SizeFormat 
CD-7993.pdf3,82 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.