Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://bibdigital.epn.edu.ec/handle/15000/22466
Titel: Caracterización de materiales compuestos formulados con residuos de la industria aceitera y resina acrílica.
Autor(en): Camacho Jácome, María Sol
Stichwörter: RAQUIS DE PALMA
RESINA ACRÍLICA
ENSAYO DE TRACCIÓN
PROPIEDADES MECÁNICAS
Erscheinungsdatum: Feb-2022
Herausgeber: Quito : EPN, 2022
Zitierform: Camacho Jácome, M. S. (2022).Caracterización de materiales compuestos formulados con residuos de la industria aceitera y resina acrílica. 47 páginas. Quito : EPN.
Zusammenfassung: The present project focused on the mechanical characterization of the composite material based on industrial waste of oil palm (Elaeis guineensis Jacq.) empty fruit bunch and water-based thermoplastic acrylic resin. In a first stage, the average value of reinforcement length was determined (based on data provided previously) by means of descriptive statistical methods. Subsequently, the main mechanical properties (tensile strength, modulus of elasticity and percentage of elongation) were determined on the basis of the data previously provided. The average length determined was 728.8 µm, which was obtained by Tukey's statistical method. The results of mechanical behaviour showed that before weathering, the values of tensile strength, modulus of elasticity and percentage of elongation were low due to limitations in the adhesion between the fiber and the matrix. On the other hand, the strength and modulus of elasticity before weathering decreased as manufacturing temperature of the material increased; however, after weathering the opposite behavior was observed; these values increased as the manufacturing temperature of the composite increased. Regarding to percentage of elongation, before and after weathering, from 120°C this value increased with the increase of the manufacturing temperature of the material.
Beschreibung: El presente proyecto se enfocó en la caracterización mecánica del material compuesto elaborado con residuos industriales de raquis de palma africana (Elaeis guineensis Jacq.) y resina acrílica termoplástica base acuosa. En una primera etapa, y a partir de los datos proporcionados de longitud de fibra, se determinó el valor promedio de longitud de refuerzo, por medio de métodos estadísticos descriptivos. Posteriormente, se determinó las principales propiedades mecánicas (resistencia a tracción, módulo de elasticidad y porcentaje de elongación) sobre la base de los datos proporcionados previamente. La longitud promedio determinada fue de 728,8 µm, la cual se obtuvo por medio del método estadístico de Tukey. Los resultados del compostamiento mecánico evidenciaron que antes del intemperismo los valores de resistencia a la tracción, módulo de elasticidad y porcentaje de elongación fueron bajos debido a la limitaciones en la adhesión entre la fibra y la matriz. Por otro lado, la resistencia y el módulo de elasticidad antes del intemperismo disminuyeron conforme aumentó la temperatura de fabricación del material; sin embargo, después del intemperismo se presentó el comportamiento contrario, estos valores aumentaron conforme se incrementó la temperatura de fabricación del composite. Con respecto al porcentaje de elongación, antes y después del intemperismo, a partir de 120°C este valor se incrementó con el aumento de la temperatura de fabricación del material.
URI: http://bibdigital.epn.edu.ec/handle/15000/22466
Art: bachelorThesis
Enthalten in den Sammlungen:TIC - Química

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
CD 11954.pdf517,7 kBAdobe PDFÖffnen/Anzeigen


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.