Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/21302
Título: Simulación de un sistema de control automático para las máquinas de procesamiento de residuos plásticos de la Fundación FUCAE
Autor: Quinaluisa Almache, Luis Fernando
Robalino Guamán, Gilson Enrique
Palabras clave: CONTROL AUTOMÁTICO
RECICLAJE DE PLÁSTICOS
MÁQUINAS DE PROCESAMIENTO
Fecha de publicación: 26-nov-2020
Citación: Quinaluisa Almache, L. F. & Robalino Guamán, G. E. (2020). Simulación de un sistema de control automático para las máquinas de procesamiento de residuos plásticos de la Fundación FUCAE. 71 hojas. Quito : EPN.
Resumen: This degree Project, SIMULATION OF AN AUTOMATIC CONTROL SYSTEM FOR PLASTIC WASTE PROCESSING MACHINES OF THE FUCAE FOUNDATION has allowed observing the operation of the system, where each machine is controlled and monitored from a control panel or in turn from a Human – Machine Interface. This Project has been divided into four parts: The Introduction part details the reasons why this thesis topic is carried out and the elements to be applied are justified to achieve a functional system that meets the established requirements. The Methodological part contains applied techniques for the development of the project, which are mainly based on the knowledge acquired during the degree and are complemented with the information obtained, the result of the research carried out. In the Results and Discussion section, an analysis of the existing equipment and the handling of PET plastic is carried out in the FUCAE Foundation, this allows creating a control algorithm for the manual and automatic handling of the system, in addition, new equipment is dimensioned for a future system implementation. Finally, the conclusions and recommendations are presented taking into consideration the objectives set and the results obtained from the Project.
Descripción: El presente proyecto de titulación, SIMULACIÓN DE UN SISTEMA DE CONTROL AUTOMÁTICO PARA LAS MÁQUINAS DE PROCESAMIENTO DE RESIDUOS PLÁSTICOS DE LA FUNDACIÓN FUCAE, ha permitido observar el funcionamiento del sistema, en donde cada máquina es controlada y monitoreada desde un panel de control o a su vez desde una Interfaz Humano - Máquina. El presente proyecto ha sido dividido en cuatro partes: La parte de Introducción detalla las razones por las cuales se realiza este tema de tesis y se justifica los elementos a aplicarse para conseguir un sistema funcional que cumpla los requerimientos establecidos. La parte Metodológica contiene técnicas aplicadas para el desarrollo del proyecto, las cuales se basan principalmente en el conocimiento adquirido durante la carrera y se complementa con la información obtenida de la investigación realizada. En la sección de Resultados y Discusión se realiza un análisis del equipamiento existente y el manejo del plástico PET en la Fundación FUCAE, esto permite crear un algoritmo de control para el manejo manual y automático del sistema, además, se dimensionan nuevos equipos para una futura implementación del sistema. Finalmente, se expone las conclusiones y recomendaciones, tomando en cuenta los objetivos planteados y los resultados obtenidos del proyecto.
URI: http://bibdigital.epn.edu.ec/handle/15000/21302
Tipo: bachelorThesis
Aparece en las colecciones:Tesis Electromecánica (EM)

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD 10820.pdf3,41 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.