Elaboración de 6 módulos de baja tensión para el laboratorio de instalaciones eléctricas – ESFOT

Abstract

This degree project, “ELABORATION OF 6 LOW VOLTAGE MODULES FOR THE LABORATORY OF ELECTRICAL INSTALLATIONS - ESFOT (CLASSROOM 33)”, will serve to provide single-phase and three-phase power at each table in the ESFOT electrical installations laboratory. The project allows providing comfortable and safe access for the different uses that will be made within laboratory practices, in addition, it consists of four chapters, which is summarized below. The first section contains the introduction and characteristics of the project, in addition to the problem statement, that part of the need to provide single-phase and three-phase power at each worktable in the electrical installations laboratory; specifically, there is the justification, which indicates the reason why and for what the project is implemented and the objectives that are defined for the assignment of tasks. Section two describes the methodology used for the development of the project and expose the activities that were necessary for the achievement of the objectives, the use of techniques and instruments in its execution. Section three details the analysis of results and indicates the design and construction of the modules, the implementation in the worktables, execution of functional tests in each of the modules and the results obtained from said tests. The last section writes the results obtained, as well as useful recommendations for the use of the modules or future similar projects.