Implementación de un sistema de distribución, control, maniobra y señalización para el ITEE-ESFOT.

Abstract

This project consists of the implementation of 3 work modules for the Electrical and Electronic Technology Laboratory (LTEE) in classroom 23 B. The main objective of this project is to improve the safety and protection of students when carrying out their practices and technical projects. Section one describes the developed component, specifying the number of modules to be built, the purpose and for which the modules are being designed and implemented, the theoretical foundations of the NEC standards and the objectives that were established for the implementation. . Section two describes the type of methodology used for the implementation of the work modules, a brief description of the possible loads that will be connected, the dimensioning of the power cable for the tables, the selection of the protection and the elements that make up the module. In addition, the installation of the materials and elements used for the construction of the work modules is described, with the elaboration of a table describing a preventive and corrective maintenance manual. Section three describes and shows the analysis of results and the tests carried out on the work modules to guarantee the correct functioning of the project. Section four and five describe the conclusions and recommendations based on the analysis of results that were presented when implementing the project.