Por favor, use este identificador para citar o enlazar este ítem: http://bibdigital.epn.edu.ec/handle/15000/22631
Título: Implementación de un prototipo de sistema de alerta por detección de desbordamiento de agua lluvia.
Autor: Soledispa Pillajo, Víctor Xavier
Palabras clave: INTERNET
RED INFORMÁTICA
AGUA
TELECOMUNICACIONES
HARDWARE DE COMUNICACIONES
SENSOR DE AGUA
Fecha de publicación: abr-2022
Editorial: Quito : EPN, 2022
Citación: Soledispa Pillajo, V. X.(2022). Implementación de un prototipo de sistema de alerta por detección de desbordamiento de agua lluvia. 51 páginas. Quito : EPN.
Resumen: The present degree project concerns the development of an alert system for rainwater overflow detection, which allows to detect the water level and based on this level determine if there is a danger to the user and if so, notify him by SMS. The document presents the development of each of the seven sections into which the project was divided. The first section defines the description of the developed component where the system operation, the general objective and the specific objectives are explained in general terms. The second section specifies the methodology developed, in accordance with the objectives outlined. The third section details the hardware and software tools that were used, as well as the construction of the electronic circuit and its placement on the model. The fourth and fifth sections present conclusions and recommendations of the project for future consideration. Finally, in the sixth and seventh sections, the bibliography and annexes that support the research of this project are presented.
Descripción: El presente proyecto de titulación concierne al desarrollo de un sistema de alerta por detección de desbordamiento de agua lluvia, el cual permite detectar el nivel de agua y en base a este nivel determinar si existe un peligro para el usuario y si es el caso notificarle mediante un mensaje SMS. En el documento se presenta el desarrollo de cada una de las siete secciones en las que se dividió el proyecto. En la primera sección se define la descripción del componente desarrollado donde se explica de manera general el funcionamiento del sistema, el objetivo general y los objetivos específicos. En la segunda sección se especifica la metodología desarrollada, conforme a los objetivos trazados. En la tercera sección se detalla las herramientas tanto de hardware como de software que fueron usadas; además, se desarrolla la construcción del circuito electrónico y la colocación de este en la maqueta. En las secciones cuarta y quinta se presentan conclusiones y recomendaciones del proyecto para ser consideradas a futuro. Finalmente, en la sexta y séptima secciones se presenta la bibliografía y anexos que sustentan la investigación de este proyecto.
URI: http://bibdigital.epn.edu.ec/handle/15000/22631
Tipo: bachelorThesis
Aparece en las colecciones:TIC - Tecnología Superior en Redes y Telecomunicaciones

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
CD 12218.pdf2,8 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.