Implementación de un prototipo de control del sistema de distribución de agua potable en una vivienda.

Abstract

The first section presents a brief introduction to the contents of the document, the approach of both the general objective and the specific objectives that are planned to be achieved with the implementation of the prototype, which has been proposed as a project. For the design, the basic concepts are presented, about the elements that will be used for the creation and implementation of the prototype, namely, those microcontrollers, distance and humidity sensors, SIM900 modules, ESP32, among other elements that will create a controlled and monitored system within a remote home through the use of a mobile device. While the second section shows the section describing the methodology used to develop the project, it briefly details the processes that have been carried out to achieve the results proposed in the objectives which were raised in the first part. The third section presents the results and the discussion, specifying the elements as the, procedures that happened for the implementation of the project, also describes the required circuits, the type of IDE, the platforms used for the realization of the code, the connections and the method used for sending SMS alerts details how to use the prototype from the mobile application made in Blynk ;The results obtained from the tests carried out at the end of the construction of the project are shown. In the fourth section are the conclusions that were described based on the experience gained during the development of the project and the recommendations that will help to improve the operation of the project to implement it in a real scenario.