Implementación de un prototipo con SoC para control de nivel de agua en una cisterna mediante comunicación Lora.

Abstract

The project to be carried out is about a water level measurement system. This has a great impact in areas where water is scarce and it is required to collect water in the months of heavy rainfall and therefore it is helpful to have a cistern. The project consists of two devices, a master device connected to Wi-Fi and the web interface and the slave device is the one connected to the sensors and actuators. In addition, the web platform contains the parameter settings and the graphs where water level and distance are displayed. In the initial section of the project, the objectives to be met were clearly defined, a thorough review was carried out to establish a solid theoretical framework and the scope of the project was delimited. In the second section, the methodology was developed, detailing how each of the proposed objectives will be implemented. The third section presents the implementation of the project in a comprehensive manner, detailing the choice of hardware, software, design and execution, ensuring that these meet the criteria of the scope of the system. For the fourth section, the correct operation was tested with the created model, simulating a cistern and performing the pertinent tests for alarm verification. At the end of the paper, the conclusions are written according to the objectives set. Similarly, the recommendations are given based on the difficulties encountered during the project. Then there are the annexes, which contain the video of operation and the code used for the implementation.