Repotenciación del tablero de centralización de iluminación externa de la ESFOT.

Abstract

This titling project is based on the repowering on the ESFOT exterior lighting board, where the activation of the exterior lights will be controled through a PLC LOGO programmed to turn on and off the different subsytems at preconfigured times, plus, a manual on/off mode. The lighting system circuit board was revamped by replacing the digital timers with a LOGO controller as the previous system failed during power outages or spikes in the lab causing the system to be out of sync. Chapter 1 describes the implemented componet, the principles used, the objetives and the scope. Chapter 2 contains the methodology that describes the system implementation process and the design of an algorithm fot the controller with two fixed time periods : one for classes and one for vacations. In the results chapter, the finished system is presented and the various test that were carried out to validate the developed system are shown. In the following chapters you will find conclusions and recommendations that summarize the most relevant aspects of the degree work.