Implementación de un firewall mediante la herramienta Ansible.

Abstract

The first chapter is a brief introduction ofthe document, in addition to the general objective and the specific objectives to be achieved with the implementation of the project. For which, fundamental concepts that were used for the development of the project are shown, such as the humidity and temperature sensor, microcontrollers, Wi-Fimodule and GSM module, among others that help the correct operation of the greenhouse control. The second chapter describes the methodology of the project, which briefly details the procedure that was carried out to meet the requirements of each of the specific objectives that make up the development of the project from start to finish. In the third chapter called results and discussion, the procedure is described in detail of the The present research project, allows to deploy the firewall and block or open ports that are required in a client, this by means of remote management with SSH from a central machine to the host machine. In the first section, the description of the project is shown, which is conformed by the analysis and characteristics that the Ansible tool requires for its execution, in this way to obtain the necessary knowledge for the correct operation of Ansible, in addition the general objective is defined, as well as the specific objectives that are guide for the development of the project. The second section describes the methodology used for the implementation of the project, showing the instructions and parameters that allow the development of each of the objectives. The third section details the procedure to have the controller node and the host node ready, and the implementation and deployment of the firewall using the Ansible tool, also in this section are the tests of correct operation of the project. The fourth and fifth sections contain conclusions and recommendations obtained in the development of the project.